Ayuda
Técnica Columna
ACARD LVD SCSI-to-SATA II bridge box is dedicated as general-purpose bridge of SCSI to SATA (Serial AT Attachment) interface. With a 2.5” SATA hard disk drive installed into LVD SCSI-to-SATA bridge, it can be connected to SCSI host adapter and works as a standard SCSI Hard Disk Drive. Users can get the maximum benefits and high performance from SCSI Bus with SATA devices.
On-chip high speed ACARD RISC micro-controller A general purpose SCSI-to-SATA HDD converter Cost effective and higher system I/O performance Creates new SCSI devices in economic cost Designed in 3.5” form factor for a built-in 2.5” SATA hard disk drive Cross-platform operation supports Windows NT / 2000 / XP / 2003 / Vista, Linux, Mac, Sun Supports full LVD/SE SCSI interface
ACARD SCSI-to-SATA Bridge Controller LVD SCSI interface for up to 160MB/sec data transfer rate 80pins Hot swap design for SCSI interface Support 2.5” SATA I、II Hard Disk Drives* Support SCSI RAID card Onboard flash ROM for easy firmware upgrade Selectable SCSI ID from 0 to 15 Dimension：14.6cm x 10.1cm x 2.5cm (L x W x H) *Note: Please refer to Compatibility List for SATA HDD
