acard logo
logo2
 
     
Home
Search
 
 
CompanyProductsSupportStoreMemberLanguage
Home / All / SCSIDE Bridge / ARS-2320
   | Download | Compatibility | Manual
   
ARS-2320
Ultra320 SCSI-to-SATA II Bridge Box
for 2.5” SATA Hard Disk Drive
 
 
Time of Warranty :12 months
next
Overview

ACARD LVD SCSI-to-SATA II bridge box is dedicated as general-purpose bridge of SCSI to SATA (Serial AT Attachment) interface. With a 2.5” SATA hard disk drive installed into LVD SCSI-to-SATA bridge, it can be connected to SCSI host adapter and works as a standard SCSI Hard Disk Drive. Users can get the maximum benefits and high performance from SCSI Bus with SATA devices.

Top
Features

  • On-chip high speed ACARD RISC micro-controller

  • A general purpose SCSI-to-SATA HDD converter

  • Cost effective and higher system I/O performance

  • Creates new SCSI devices in economic cost

  • Designed in 3.5” form factor for a built-in 2.5” SATA hard disk drive

  • Cross-platform operation supports Windows NT / 2000 / XP / 2003 / Vista, Linux, Mac, Sun

  • Supports full LVD/SE SCSI interface

Top
Specifications

  • ACARD SCSI-to-SATA Bridge Controller

  • LVD SCSI interface for up to 320MB/sec data transfer rate

  • 68pins design for SCSI interface

  • Support 2.5" SATA I、II Hard Disk Drives*

  • Support SCSI RAID card

  • Onboard flash ROM for easy firmware upgrade

  • Selectable SCSI ID from 0 to 15

  • Dimension:14.6cm x 10.1cm x 2.5cm (L x W x H)


  • *Note: Please refer to Compatibility List for SATA HDD

Top
| Storage |
| Adapter |
| IC |
 
About Us Products Downloads Online Shop MemberCS Q&ASiteMap
Copyright 1996-2012 ACARD All right reserved.
Home